Pre-Shrunk Polyester Cord
Less than 3% RS at 350°F/1hr.
For fine wire or soft insulation systems where shrinkable tensions are undesirable. Available on a straight tube or cone wound.
Suggested Coatings:
“CL” Polyurethane, “W” Wax, “X” Untreated.
| Part Number | Approx. Diameter Inches | Nominal Break Lbs. | Yield Yds./Lbs. Uncoated | Standard Put-Up |
| DRT-45PS | .026 | 45 | 1300 | 1, 2, 4, 6 lbs. |
| DRT-50PS | .028 | 50 | 1200 | 1, 2, 4, 6 lbs. |
| DRT-65PS | .030 | 65 | 800 | 1, 2, 4, 6 lbs. |
Comments on this entry are closed.